Open role
Plumber
- Aggregated by CV-Library
- Durham, County Durham
- Contract
- Full Time
- £91,250 - £91,250 Per Day
Job Description
Job: Plumber
Location: DH4 4FB, County Durham
Hours: 08:00am - 16:00pm
Pay: £250 per day
Start Date: Monday 24th (1 day job)
Responsibilies:
Inspect the existing hot water cylinder pressure relief valve, tundish and associated discharge pipework.
Rectify the incorrectly installed pressure relief valve discharge arrangement to ensure it complies with current Building Regulations and relevant plumbing requirements.
Correct the tundish installation so that it is properly aligned, level and positioned to allow safe and effective discharge.
Investigate and address the issue caused by the existing floor noggin position, including making any necessary alterations to facilitate the correct installation.
Reconfigure the discharge pipework so that any water released from the safety/pressure relief valves is directed correctly through the tundish and into the designated discharge pipe, rather than spilling into the floor cavity.
Ensure the discharge pipe is correctly connected to the tundish and installed at the appropriate angle and orientation.
Check all connections and pipework for leaks and signs of previous water discharge or staining.
Test the pressure relief/safety valve discharge arrangement following completion to confirm water is safely discharged to the intended drain/outlet.
Make good any disturbed pipework or surrounding areas as required.
Leave the work area clean and safe upon completion.
Provide photographic evidence of the completed works and confirm that the installation has been rectified and is functioning correctly.Requirements:
JIB card
Attention to details
5 point PPE and own tools Please apply to be considered
If you are interested, please apply or contact Ellie at Tech-people on (phone number removed)
Location: DH4 4FB, County Durham
Hours: 08:00am - 16:00pm
Pay: £250 per day
Start Date: Monday 24th (1 day job)
Responsibilies:
Inspect the existing hot water cylinder pressure relief valve, tundish and associated discharge pipework.
Rectify the incorrectly installed pressure relief valve discharge arrangement to ensure it complies with current Building Regulations and relevant plumbing requirements.
Correct the tundish installation so that it is properly aligned, level and positioned to allow safe and effective discharge.
Investigate and address the issue caused by the existing floor noggin position, including making any necessary alterations to facilitate the correct installation.
Reconfigure the discharge pipework so that any water released from the safety/pressure relief valves is directed correctly through the tundish and into the designated discharge pipe, rather than spilling into the floor cavity.
Ensure the discharge pipe is correctly connected to the tundish and installed at the appropriate angle and orientation.
Check all connections and pipework for leaks and signs of previous water discharge or staining.
Test the pressure relief/safety valve discharge arrangement following completion to confirm water is safely discharged to the intended drain/outlet.
Make good any disturbed pipework or surrounding areas as required.
Leave the work area clean and safe upon completion.
Provide photographic evidence of the completed works and confirm that the installation has been rectified and is functioning correctly.Requirements:
JIB card
Attention to details
5 point PPE and own tools Please apply to be considered
If you are interested, please apply or contact Ellie at Tech-people on (phone number removed)